TotalBoat FlexEpox Flexible Epoxy Adhesive (32 Ounce)

Two-part TotalBoat FlexEpox has the powerful adhesive bonding strength epoxy is known for, but it’s much more flexible than traditional epoxy resin/hardener formulas, and can absorb stresses caused by excessive flexing without delaminating or cracking. It creates permanent, waterproof structural bonds on metals and is perfect for repairing leaky aluminum boats. Also adheres strongly to fiberglass, most plastics, stone, glass, and wood—even oily domestic and tropical hardwoods that are typically very difficult to glue. This versatile adhesive has a honey-like viscosity that’s thick enough not to drain out of bonded joints, yet fluid enough to wet out fiberglass cloth and tape easily. Perfect for putting skid plates on canoes and kayaks or fabricating laminated parts that are subjected to extreme flexing. FlexEpox forms tough, dependable bonds whether it’s applied to dry or damp surfaces, and can be used in temperatures as cool as 40°F and as warm as 125°F. In the right conditions, it can even cure underwater. It’s so easy to use, with a simple 1 to 1 mix ratio by volume and generous working time for bonding and clamping. At 72°F, pot life is 40 minutes, working time (thin film) is 75 minutes, initial cure time is 3-4 hours, workable cure time is between 7 to 10 hours. Wait a minimum of 24 hours before subjecting to high loads. TotalBoat FlexEpox compares to West System G/Flex 650, but maintains its form better at higher temperatures, and is a better value. Compared to typical one-part flexible marine urethane adhesives, FlexEpox is more flexible and has better long-term performance. The 8 oz. Kit contains one 4 oz. bottle of resin and one 4 oz. bottle of hardener. The 32 oz. Kit contains one 16 oz. bottle of resin and one 16 oz. bottle of hardener. All TotalBoat products are developed by boaters for boaters, to provide great value and great results. We know what works and what doesn't. 100% made in the USA.

• Two-part flexible epoxy adhesive produces permanent, structural bonds with high flex tolerances.
• Easy 1:1 mix ratio, long working time, and fast cure time for reliable results—every time.
• Waterproof bonding of wood, metal, fiberglass, glass, most plastics, stone, and masonry.
• Can be used in cooler temperatures, on damp surfaces, and can even cure underwater.
• Ideal viscosity for bonding joints or wetting out fiberglass fabric and tape to create flexible laminates.